Would you like someone from Mil-tek to contact you? Complete the form below or call +971 4 8801912 to speak with one of our consultants.
Many businesses use EPS (expanded polystyrene) for packaging, including electronics manufacturers, distributors, fishing handling and food processing industries; It is an ideal material to protect goods and parts during transport.The Mil-tek EPS1000 Polystyrene Compactor is the ideal solution for disposing of EPS6, the most commonly used form of expanded polystyrene.The Mil-tek EPS1000 Polystyrene Compactor breaks down and reforms EPS6 into a briquette which can be sold and recycled into plastic components..By processing EPS6 using a Mil-tek EPS1000 Polystyrene Compactor, businesses not only make substantial savings on the cost of sending it in bulk to landfills but they also generate revenue for the organisation, turning a cost into a source of income.A Mil-tek consultant will assist in arranging a buyer for compacted EPS6 through local or national recyclers.
Nonstop is a computer retailer specialising in IT management for organisations. A Mil-tek EPS1000 allows them to both compact and generate revenue from the large volumes of EPS 6 they handle.
Styropack are a leading manufacturer of protective and insulating polystyrene packaging. A Mil-tek EPS1000 allows them to more easily dispose of EPS waste.
Electrolux is a multinational appliance manufacturer. They dispose of all home delivery packaging and recycle their compacted EPS6.
Installation is carried out by a Mil-tek technician. Your EPS Compactor will be installed in the most optimal position to facilitate workflow.
Place EPS6 packaging into the compactor. Once the door is closed, a rotating shredder shreds the packaging.
The shredded EPS is then pushed down into a screw conveyor, which presses and moulds the material into a compressed briquette form.
This compacted briquette is 10 times smaller, easily stored, and is now a commercial commodity.
Expanded polystyrene (EPS) is inert and does not de-compose; once it enters a landfill it will stay there forever. By compacting and recycling Polystyrene, you can reduce your existing waste costs by up to 80%, by avoiding unnecessary transport costs and reducing bins / skips and lifts required.
The Mil-tek EPS1000 shreds the polystyrene into fine grains. These are then melted to remove the air and significantly reduce the size. The EPS is then compacted in dense, manageable briquettes.
Yes you can. Dense, compacted polystyrene can be recycled into almost any plastic based product: mobile phones, speakers, televisions, toys etc. It is much cheaper than manufacturing 'new' plastic, making it a popular commodity.
Ask someone who knows: Mil-tek assist companies all of the world in doing exactly this, and your consultant will ensure you find a local recycler willing to take this off your hands.
EPS6 Polystyrene is the preferred form of transport by almost all fish processing companies, as it is lightweight, durable and waterproof. A Mil-tek EPS compactor turns the disposal of EPS6 boxes from a logistical headache into a simple and efficient revenue stream.
Electronics, homewares and furniture shops handle large volumes of EPS6 on a daily basis. A Mil-tek EPS will not only solve the problem of un-compacted waste for the shop itself, but also for its customers and delivery staff.
Many distribution companies handle large volumes of surplus packing including EPS6, both in-house and via their delivery fleet. By unpacking or unloading packaging into an EPS Polystyrene Compactor, the EPS is converted from a logistical headache into a simple and efficient revenue stream.
| Height (mm) | 2180 |
| Width (mm) | 1350 (3155) |
| Depth (mm) | 785 |
| Weight | 290 kg |
| Block size height (mm) | 137 |
| Block size width (mm) | 137 |
| Material | EPS6 (Expanded Polystyrene) |
| Density | <300 g/litre (<300 kg/m³) |
| Capacity | <15 kg / hour |
| Height (mm) | 510 |
| Width (mm) | 860 |
| Depth (mm) | 460 |
| Amp. | 5,1 A |
| Power | 3 phase - 400 V |
| Approvals | CE |
Menu
Al Wasl Properties,
Warehouse No. 01-F
Near Dubai Precast,
Jebel Ali Industrial Area
Dubai, UAE
Tel: +971 4 880 1912
©2021 All Rights Reserved. Mil-tek And The Mil-tek Logo Are Registered Trademarks Of Mil-tek Danmark A/S.
Want the latest news, insights and expert advice from around the industry? Join the conversation.
By submitting a form on this website, you are requesting for Mil-tek to contact you directly. Your personal information will be kept securely and remain private.
Should you wish to opt-out from all future communications, please contact a Mil-tek representative or click here
